What does error code 59.C0 on the HP LaserJet Pro MFP M277dw M575 and M551 mean? What are the causes behind this error code? If you’re seeking answers to these questions then you are in the right place.
HP laserjet printers are very easy to use reliable printers and they also provide high quality prints. This article discusses how the 59.C0 error occurs, what the error code means, and the methods to solve this issue. This will help you have a hassle-free printing experience.
Meaning of the error code 59.c0
Error code 59.C0 on the HP Laserjet Pro MFP M277dw M575 and M551 printer indicates a Driver motor rotation error. This means that the machine experienced a problem with one of the internal motors. Make sure the printer is plugged directly into the wall, any surge protector or other high current draw device on the same circuit can also cause this problem. However, this error can occur due to various reasons, let’s have a look at them.
- If the machine is not used for a long time.
- If the fixing unit, or drum cartridge
- check IDB unit is defective or has any tight.
Solution for 59.C0 on HP laser jet
Method 1: Restart the printer
- Turn off the power of the printer by using the power switch. Then wait at least 30 seconds. Then turn on the power and wait for the printer to initialize.
Method 2: Check the Cartridges:
- First, Remove all toner and Drum cartridges from the machine, then install the cartridges one by one. If you feel any tightness when installing any cartridge, replace that cartridge.
Method 3 – Check the fuser unit:
- Remove the fuser unit from the machine and then rotate it manually. Also, check the gear or fuser film. If there are any defects, replace them. Then reinstall the fuser unit into the machine.
Method 4 – check transfer unit:
- IDB unit for any damage or obstruction. If yes, then replace the unit which has the issue.
Method 5 – Check the driver motor:
- If the error persists, replace the driver motor.
Below are some error codes related to the 59.C0 error code. Each of the codes refers to each of the motors. So, solve these problems with the methods given here.
- Fuser motor startup error: 59.30
- Fuser motor rotation error: 59.40
- Fuser Motor Assembly RM2–7348–000CN
- Black developer motor startup error: 59.70
- Cyan developer motor startup error: 59.71
- Magenta developer motor startup error: 59.72
- Yellow developer motor startup error: 59.73
- Black developer motor rotation error: 59.80
- Cyan developer motor rotation error: 59.81
- Magenta developer motor rotation error: 59.82
- Yellow developer motor rotation error: 59.83
- ITB motor start error: 59.90
- ITB motor rotation error59.C0
