If you’ve encountered the error code e000001-0007 Canon ir adv c5560i, you’re not alone. This error can be frustrating, but fear not – we’ve got you covered.

The Canon imageRunner Advance c5535i, c5540i, c5550i, and c5560i, are robust multifunction printers, but like any electronic device, they may encounter errors. One common error users face is the E000001-0007 error code. This error typically points to a temperature-related issue within the fixing assembly of your printer. In this article, we’ll explore steps to resolve the E000001-0007 error on your Canon printer, ensuring your Canon printer is back up and running smoothly.

Fuser related error codes

  • E000001-0001 – The Fixing Main Thermistor detected a high-temperature error.
  • E000001-0002 – The Fixing Thermistor of the Front detected a high-temperature error.
  • E000001-0003 – The Fixing Thermistor of the Rear detected a high-temperature error.
  • E000001-0004 – The Fixing Film Thermistor of the Middle detected a high-temperature error.
  • E000001-0005 – The Fixing Film Thermistor of the Front detected a high-temperature error.
  • E000001-0006 – The Fixing Film Thermistor of the Rear detected a high-temperature error.
  • E000001-0007 – The Fixing Thermistor detected a high-temperature error.

Meaning of the error code E000001-0007 on Canon IR ADV

The error code E000001-0007, also known as the Fixing Thermistor high-temperature detection error, may occur for various reasons, whether it’s a malfunctioning sensor or an overheating problem. We’ll explore all possible causes.

If the error started after servicing the fixing unit, then check the seating of the pressure roller, pressure roller bush, bearing, and its wiring. Also, make sure the fuser lock is properly seated. This is a fixing Thermistor problem, meaning the machine isn’t getting sufficient heat from the Thermistor. This may occur due to voltage problems or if the lamp and Thermistor have any defects. After performing the methods mentioned, you need to reset the error code to resume your work. The procedure for restarting is provided below.

  • Firstly, you need to enter service mode to reset the error code E000001-0007.
  • To enter service mode, press *, then 2 and 8 together. Afterward, press *, select COPIER, and choose FUNCTION, CLEAR, and ERROR, respectively. Press OK, turn off the power and then turn it back on.

Solution for the error code

  • Inspect the Fixing unit and Fuser lock for visible damage or any seating problems. Replace it if necessary.
  • Check the Thermistor, lamp, and Sensors for damage or disconnection. Also, replace it if needed. The Thermistor and lamp are located inside the Film assembly.
  • Check the connections.
  • Examine the DC controller PCB.

By following these methods, you should be able to address the E000001-0007 error on your Canon iR ADV C5535i, C5540i, C5550i, and C5560i. If the issue persists, seeking professional assistance ensures a thorough examination of the printer’s components. With regular maintenance and the right guidance, you can tackle and overcome technical issues like a pro.


Related posts

  • canon error code e00007.
  • canon error code e00000.
  • canon error code e00027.

Shares:

Leave a Reply

Your email address will not be published. Required fields are marked *